0:00
Here I have Manta Titanium 3 and let me show you how to check serial number of the following device
0:10
So at the very beginning let me start by using a home screen, let me find and select the
0:15
settings, let's scroll down to the bottom of the list and simply choose about phone
0:20
Afterwards let's choose on status and right here you should find the serial number
0:26
So you can read this identifier or you can use another method of checking serial number
0:33
it is the manual one so you can do it even with your phone turned off
0:37
So that's what I'm gonna do, let me switch off my device, press power off and tap OK
0:43
to confirm it, wait until your device will be completely switched off
0:51
Afterwards let's remove the back cover, let's do it by using the cavity at the down left
0:56
edge of the device right here, let's just simply use your nail finger, let's do it step
1:01
by step from the bottom of the device to the top. Now you have access to your battery, let's remove your battery
1:10
And as you can see here you've got the information about your serial number
1:14
So you can read this number or you may also use a barcode to this number
1:18
So that's it, now let's install the battery, let me close the back cover protection
1:27
Let me switch on my device by holding a power key. The Manta is turning on, let's wait a couple of seconds
1:37
Excellent, as you can see now the phone is in normal mode so you can start using your
1:49
device. Thank you for watching, please subscribe our channel and leave thumbs up under the video
