0:00
Here I have programmed my phone and let me show you how to insert here sim and sd card
0:10
At the very beginning let's use your power key to switch off your phone
0:14
Let's hold down power for a little bit longer than usual one
0:19
From the following menu let's tap power off and tap ok to confirm it
0:23
Wait until your phone is completely switched off and afterward you have to find a tray
0:28
to your slots. It should be located at the left edge of the phone right here and simply use some bumper
0:35
tag or special eject tool to open this tray. So let me do it
0:40
Let's push it into this hole. And as you can see right now you can remove the whole thing from your device
0:49
So let me do it. As simple as that. Just remove it from your phone
0:59
Then you can insert here both sim cards right here and right here or just one sim card and
1:06
one micro sd card. So let me show you how to do it in the second way
1:12
In this slot let me insert memory card, micro sd card, the characteristic is right here
1:17
and let's put this card in that position. Let me show you. Excellent
1:24
It should be located as that. Now let's insert in the second slot micro sim card
1:31
The characteristic is right here and simply put this card in that position. Excellent
1:38
Now the tray is prepared to inserting. Let's push it into your phone
1:44
So let's do it that way. Excellent
1:54
And let's push it to the end. Make sure it's closed. And now all you have to do is simply press power key to switch on your phone and check
2:03
if both cards are working properly. Kroger MatLife 4 is switching on. Excellent
2:17
As you can see new sd card detected so it's a good sign. Now let's unlock the screen
2:22
And let's tap settings. Here you have the information about your sim card
2:27
Let me tap no or yes. It depends on you. Let me choose yes
2:31
Tap settings and as you can see right here you can choose sim cards
2:35
This is the confirmation that the phone is reading our sim card
2:40
You can also go back to a device tab and choose storage and USB
2:45
And here you've got information about your sd card. So everything went well
2:49
Both cards are working perfectly. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
