0:00
Here I have Kano Elegance 5.1 and let me show you how to enter the factory mode on the following device
0:10
At first let's start by holding a power key, then let's choose power off and double
0:15
key to confirm it. Wait until your device will be completely switched off and afterwards let's use the
0:22
following combination of keys, power key and volume down. Let's hold down together these two keys for a few seconds, keep holding both keys
0:39
and release them as soon as Kano logo pops up on the screen
0:43
Now the device is booting into factory mode and the following mode is already on the screen
0:48
Here you can navigate by using both volume keys, you can perform auto test and test all
0:52
of the hardware and features from your device, you can select manual test or item test to
0:59
select only the desired one. You can then see the test report, perform debug test, choose Clear eMMC to perform the
1:07
hardest operation so in order to erase all personal data and customize settings, you
1:12
may check the version right here for example, let me press power key to select it
1:18
This is the version of your device, the kernel version, android version, email numbers and
1:24
some other stuff, let's go back
1:34
And if you would like to quit this mode let's choose reboot, so let me do it, let's press
1:38
power key to select it and now the device is restarting and rebooting, let's wait a
1:44
few seconds until the device will be ready
1:55
Excellent as you can see now you may unlock the screen and start using your device
2:00
So everything went well, thank you for watching, please subscribe our channel and leave thumbs
