0:00
Here I have Lenovo K6 Note and let me show you how to enable the fingerprint protection
0:10
on the following device. So let me show you how to add the fingerprint to this device
0:14
At the very beginning let's find and select the settings. Now let's scroll down and here we have to find and select the security
0:22
Let's choose fingerprint right here. Here we've got the information, tap continue
0:28
Let's now choose setup screen lock. Before you add your fingerprint you need to enter some backup screen lock method
0:34
It could be pattern, pin or password. In my case let me use pattern
0:38
You can require pattern to start the device or you can choose no thanks. Let me choose no thanks, tap continue
0:44
Let's draw your unlock pattern. Let's do it twice just for confirmation
0:48
You have to select one of the following form of notifications. You can show all notification content, you can hide some sensitive one or you can don't
0:57
show notifications at all. In my case let me show all content, tap done
1:02
And now you need to tap next and find your sensor. Choose next again
1:07
The sensor is located right here at the back of the device
1:11
Let's just start tapping the sensor a couple of times to save the whole fingerprint
1:19
Let's just keep tapping right here. And that's it. As you can see fingerprint added, you can add another one or you can tap done
1:27
So everything went well. Now if you lock your device by using the power key you can unlock it by using the fingerprint
1:35
or by using your sensor. Just tap on the sensor and that's it
1:39
Everything went well. Thank you for watching. Please subscribe our channel, leave thumbs up under the video
