0:00
Here I have LG G4C and let me show you how to enter the download mode on the following device
0:11
So at the very beginning let me start by holding a power key. Let's keep holding power button
0:20
Let me press power off right here and tap ok to confirm the whole operation
0:24
Wait until your device will be completely switched off. And afterwards let me prepare a micro USB cable connected to your device
0:34
Here I have such a cable. And then you have to start holding volume up right here
0:39
Keep holding volume up and while holding volume up connect your phone by using micro USB cable
0:47
Remember to keep holding volume up and that's it. As you can see the download mode is loading
0:52
And now the device is trying to update the firmware. So you can try to update your firmware but if you don't do anything, if you are not actually
1:03
updating your firmware you can quit this mode. The simplest way to do it is by using the soft reset
1:10
So by removing the battery for about a few seconds let me do it
1:14
You can disconnect your device from a charger from the micro USB cable
1:19
Let's remove the back cover by using the cavity at the left edge of the device
1:24
And do it as simple as that. And let's remove the battery by using the cavity at the down edge
1:31
Let me do it for about 5 to 10 seconds just to reset your device
1:35
Then put it back in the exactly the same way. Let's close debug cover protection
1:41
And let me just press power key to switch on the device. The LG G4C is turning on
1:55
Excellent, as you can see now we can unlock the device. The phone is in the normal mode
2:00
So you can use your phone. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
