0:00
Here I have all Vue X free so light and let me show you how to insert here micro SIM and
0:09
micro SD card. So at the very beginning let me start by holding a power key
0:15
From the following menu let's choose power off and wait until your device will be completely
0:19
switched off. Afterwards you have to use your back panel and let's remove this back cover protection
0:27
by using the cavity at the left edge of the device right here
0:33
Let's use your nail finger to open this thing. Let's do it step by step from the bottom of your device to the top
0:45
Now you have access to your battery and also to your slots
0:49
As you can see you can insert here SIM and micro SD and this is the second slot for SIM card
0:56
In my case let me use just these two slots. Let me remove the battery by using the cavity at the down edge of the item
1:06
Now it's easier to insert the cards. Let's start by inputting SIM card
1:12
This is my micro SIM card with the characteristic edge right here and let me put this card in
1:18
that position. Let's just push it to the end. Now let me insert the micro SD with the characteristic edge right here and let's put this card in
1:29
that position. And let's press it to the end. That's it. Let me leave this second SIM slot empty
1:39
Now let's put back the battery and close the back cover protection
1:47
Let me just switch on the device by holding a power key
1:56
The AllView X3 sunlight is turning on. Let's wait a couple of seconds
2:13
Let's unlock the screen and let me check if both cards are working properly
2:16
So let's find and select the settings. Choose dual SIM setting and as you can see the phone is reading our SIM card
2:26
So let's go back and scroll down. Choose advanced settings. Choose storage and USB and as you can see the device is reading our portable storage
2:41
so our SD card and everything is working perfectly. Thank you for watching
2:46
Please subscribe our channel and leave thumbs up under the video
