0:00
Hello, today I'm in Jeep Wrangler. In this video I'll show you how to manage automatic gearbox
0:13
In the beginning let's take a look in the middle of the car and as you can see right here we've got two gearbox sticks
0:19
The first one is to change between parking, reverse, neutral, drive and manual
0:27
And the second one is changing the torque and the transmission power
0:33
So let's start with this one. To change between parking and reverse press the brake pedal
0:40
now press the button located in the front of the stick and now pull the lever
0:47
Now we are in reverse. To go to neutral you can simply push the lever without pressing this button
0:54
Same when you are going to drive mode. If you push this button to the stick left you can use the gearbox in manual mode
1:04
Now you can increase or decrease the gear by pushing the lever forward or downwards
1:13
Let's stick to the parking mode and now let's focus on this lever right here
1:22
Thanks to this lever we can change the torque power in our car
1:27
So we've got the four modes 2H, 4H, N and 4L. The 2H should be used in dry terrains and this mode is for regular driving, nothing extra is required under ordinary circumstances
1:47
Then we've got the 2H. To change it we have to select drive and now we will be able to set to 2H but only while driving
2:05
I can't push it right now on the stop. Then 2H is the position to use when traveling at normal speeds but needs a little more traction in rough, loose and slippery roads
2:20
On slick roads the front tires will increase traction to improve the Jeep's stability
2:26
Then we've got the neutral and the 4L which is the lower gear ratio and gauges all your wheels in low range resulting in a slower road speed and more torque
2:43
This position improves engine braking and makes it easier to drive your car in rough circumstances
2:53
And that's basically it. If you find this video helpful please leave a like, comment and subscribe
