0:00
Here I have Kruger Mazdrive 4 and let me show you how to insert microSD and sim card in
0:10
this device. At the very beginning hold down the power key for a few seconds, then from the following
0:15
options let's choose power off and tap OK to confirm the whole operation
0:21
Afterwards you have to open the protection at the right edge of your phone
0:28
Then you have to prepare some tiny tool, it could be a special eject tool from Kruger
0:33
Maz or it could be a flambertack or something like that. Then press this tool into this little hole
0:41
Now you can remove the whole tray from your device and here you should input micro sim card
0:48
Here I have one of the following cards with the characteristic edge right here and simply
0:54
put this card in that position. Excellent. The tray is ready to use
1:00
Now you can insert the whole tray into your phone. Let me show you
1:09
Just do it like that and then push it to the end
1:14
You can close the first protection and let's open another slot. Let's open protection and now let's use your eject tool
1:26
Let's press this button. Now you can remove the whole tray from your phone and here you should input memory card
1:35
In that case it's of course micro SD card with the characteristic edge right here and
1:39
simply put this card in that position. The tray is ready to use
1:45
Let's insert the whole item into your phone and let's close that protection
1:53
Let me switch on my device to check if both cards are working properly
1:58
Kruger and Matz is turning on. Excellent
2:09
Let me unlock my device. As you can see the sim card was detected so our sim card was installed properly
2:21
Now let me go to settings, scroll down and choose storage, scroll down and as you can
2:28
see the SD card was found so our memory card was installed also properly
2:34
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
