0:00
Here I have Huawei P8 and let me show you how to connect this device into a fastboot
0:11
mode and how to read a couple of important information by using the ADB fastboot application
0:17
So at the very beginning you have to download and install a couple of things, the drivers
0:22
for your Huawei and ADB application, all links will be under the video in the description
0:29
So as you can see I've got everything installed, here I've got my HiSuite, so this is the link
0:38
this is the application of my drivers and ADB setup. So afterwards you need to enter the fastboot mode on your device, so let me do it, let's
0:48
just press power key to switch off the Huawei, press power off and touch power off again
0:55
wait a few seconds and afterwards if you are ready let's just prepare a micro USB cable
1:03
connected to your PC, let's start holding volume down and while holding volume down
1:08
connect your device by using micro USB cable. Keep holding volume down and release volume down as soon as fastboot and rescue mode pops
1:20
up on the screen. So that's what we need, let's just find the command prompt, so let's open command prompt
1:34
let's just use a right click and let's choose run as administrator and as you can see now
1:40
you can enter here a couple of commands, so if you install ADB and everything into a default
1:47
directory you should use the following command, let's use cd slash and the next command cd
1:58
adb, now let's check if our device is properly connected, let's choose fastboot devices
2:14
excellent it means that our ADB is reading the Huawei P8, so everything is alright, now
2:21
let's check a couple of important information, let's start by reading the phone product code
2:28
so let's enter fastboot oem get product get dash product dash model, let's press enter
2:52
as you can see here we can read our product model as you can see in my case is GRA-L09
3:01
right here, so it's very important information when you are looking for appropriate firmware
3:06
appropriate software, now let me show you how to read also the email and serial number
3:12
let's just use the following command fastboot oem get dash psid and as you can see the serial
3:35
number and email number just pops up in front of you and let me show you the last thing how
3:41
to check the phone firmware, the version information, so let's use fastboot oem get
3:54
dash build dash number, let's just press enter and you can read the build number, the version
4:13
of your device, so that's it, if you would like to just restart your device let's just enter
4:19
fastboot reboot and the device as you can see the device is restarting and rebooting into a
4:30
normal mode, you may disconnect your device from your PC as simple as that and wait a couple of
4:35
seconds until your device will be ready to use, the Huawei P8 is turning on let's wait a couple
4:55
of seconds, excellent now you may use your device, so everything went well
5:08
thank you for watching, please subscribe our channel and leave thumbs up under the video
