0:00
Here I have Kana Elegance 5.1 and let me show you how to enter the fastboot mode on the
0:09
following device. At the very beginning let's start by holding a power key, then choose power off and tap
0:16
ok to confirm the whole operation. Wait until your device will be completely switched off and afterwards let's use the
0:22
following combination of keys. Power key and volume up, let's hold down together these two keys for a few seconds, keep holding
0:30
both keys and release them as soon as boot mode pops up on the screen
0:35
Here you can navigate by using volume up, let's choose the second option which is fastboot
0:40
and confirm this option by pressing volume down. As you can see right here the device is in fastboot mode, so you can use your desired
0:47
mode or you can simply quit it by pressing power key. You should try switching off by pressing power key but sometimes that method doesn't work
0:59
And then you have to use your battery, so let me show you
1:03
Let's remove the battery by using the cavity at the left edge of the device
1:10
And let's just simply restart your device by removing your battery for about 2 seconds
1:16
Let's remove the back cover by using this cavity, now use the cavity on the battery
1:22
and let me simply remove the battery for about 5 to 10 seconds and then put it back in the
1:28
exactly the same way. Let's close the back cover protection and now let's press power key to switch on the device
1:40
The phone is booting into a normal mode, let's wait a couple of seconds
1:52
Excellent, as you can see the Qiano home screen just pops up, now you may use your device
1:58
Thank you for watching, please subscribe our channel and leave thumbs up under the video
