0:00
Here I have Alcatel OneTouch Pop 3 and let me show you how to insert microSD and SIM
0:09
card in the following device. At the very beginning hold down the power key for a few seconds
0:15
When the following options appears on the screen choose power off and confirm this operation
0:19
by tapping OK. Wait until your device is completely switched off and afterwards you have to find the cavity
0:24
at the right edge of your phone in that corner and simply use your nail finger to open the
0:29
back cover. Then you have to remove the battery by using the following cavity and now you have access
0:38
to your slots. First of all let's insert SIM card. Here I have one of the following card with the characteristic edge right here and simply
0:48
put your SIM card in that way, in that slot. Excellent. Now let's install the microSD card with the characteristic edge right here and put this
1:02
card in that slot. Push it to the end. Excellent. Now you can put back the battery in that way with the characteristic edge right here
1:21
Take the back cover and let's switch on your device by holding the power key
1:33
The Alcatel is turning on. Excellent
2:17
As you can see the device connected to one of the mobile network so our SIM card was
2:22
installed properly. Now let's go to settings. At first let me change language to English. Excellent
2:40
And from the list of settings let's find and select storage and as you can see the phone
2:49
is detected our SD card so our memory card was installed properly
2:54
Thank you for watching. Don't forget to subscribe our channel and leave thumbs up under this video
