0:00
Here I have LG G3 and I will show you how to insert SIM card and microSD card in this device
0:10
First of all hold down the power key for a few seconds
0:16
Then tap power off and confirm the whole operation by tapping OK
0:21
Wait until your device is completely shut down. And afterwards you have to remove the back cover by using the cavity at the right edge
0:29
of your phone. Simply use your nail finger to open the whole thing
0:35
Now let's remove the battery by using this cavity. Excellent and now you have access to your slots
0:47
The first one is for your microSD card, microSIM card sorry. This is one of the following cards and you have to put this card in that position
1:01
Excellent now let's install the microSD card. Here I have the following card with the characteristics right here and put this card in that way
1:17
Make sure that both cards are pressed to the end. And now let's insert back the back cover and the battery
1:35
Excellent now let's switch on your device by holding the power key
1:45
The device is turning on
2:09
For example let's check if our phone is reading our SD card. So tap apps icon, find and select settings, tap general, scroll down, choose storage and
2:27
as you can see the SD card has been found on our device so everything works properly
2:34
You can also observe that the phone is connected to one of the mobile network so our SIM card
2:41
is also installed properly. Thank you for watching, please subscribe our channel and leave thumbs up under the video
