0:07
In front of me is a Samsung Galaxy M10 and I'll show you how to bypass the Google verification
0:15
So assuming the device is locked. To basically proceed with it we will need to go to the site as you can see, find the phone
0:28
and from here you will need to download all this, Odin, Samsung and basically all the six links
0:36
And we'll need all of them. As you can see, I have already all of them here
0:44
Now once you download them, install most certainly this one, because it's an installation for this program to work correctly with the phone and also Samsung drivers
0:56
And also, when you download the normal files, I would start probably with this link because it will take the longest to download
1:05
It's one of the bigger ones, so it will take some time to download
1:10
And once it's actually downloaded, you can proceed. So starting the process off, we will run Odin
1:20
As you can see. And we will need to put the device in download mode
1:26
which we will do by powering it off. And you need a cable plugged into the computer
1:36
And once plugged into the computer, you will hold the volume up and down
1:40
and then plug it to your phone. Like so. As you can see, warning message pops up
1:49
just on volume up to continue. And we're now in download mode
1:53
And as you've just seen on the screen, the program sees the phone right here and what we will need to do is add an AP file which is the second link right here
2:09
so I'm going to tap on AP and I'm going to navigate to that directory
2:20
I'm going to choose it and need to wait for it to actually upload to the program
2:25
it might take a minute and once it's going to upload we're just going to tap on
2:34
start and the file is going to begin installing on the device
2:49
yeah you can see now it's done and we can top on start and you just see now it's done and we can top on start and you just see
2:56
on a device progress bar popped up. So let's give it a couple minutes for it to install
3:06
And from there we can, well, where we can turn on the number 4, FRP unlocker, as long
3:15
as you have installed the drivers for it Overall the link number 6 which is this one this will work
3:25
so once it reboots we'll see the device right here up here info about it and then we can tap on unlock
3:45
pass you can unplug it from the device for now for a moment we'll need to plug it back in
3:51
anyway okay so once you see this you can plug it back in back in as you can see it
4:05
just appeared on the program it's recognized so we can tap on unlock and once it's
4:13
unlocked you can close the program it's not needed anymore okay so success close it
4:20
and now power it off and unplug it actually again because we need to put it back
4:27
into the download mode so power it off volume up and down together and while you
4:35
hold it up there plug it in again then volume up once
4:43
and we're back in download mode and we're going back to the Odin so from here we're
4:50
going to choose the Samsung normal files which is link number three and we're going to start with
5:03
basically placing them as their their name so BL just choose BL file AP AP
5:13
Now the AP file takes a little bit longer because it's one of the bigger files, so be patient
5:23
Okay, so from there, I'm going to choose CP
5:43
Okay. Now that everything is added, we're going to top on start
6:02
And basically the Samsung's Android is going to start installing on a device, so be patient
6:13
Now it will take a little bit longer than previously it has a little bit more to install so I'll be back once at reboots
6:43
I going to be Okay As you can see, the installation has been finished so we can unplug the device now
7:17
And I'm going to place it up. And from here, we're going to go through the setup process fairly quickly because we're actually
7:24
need to do one more thing. So next. So now we'll need to go into settings and activate developer mode
7:45
So let's do so. Yeah. Go all the way down into About Phone
8:04
Well, I'm going to search it. I think it's going to be faster, so. I'm going to type build number
8:13
Okay, build number. As you can see, it's right here. So if you have trouble finding it, you can do the same
8:20
Just type it in and then top it seven times. Until you see the message you are now developer that appeared on the bottom
8:28
From here we can go one down. And right now, the last thing you will see is developer option
8:33
So from here, tap on it. And you will see the OEM unlock
8:37
so some reason it's supposed to be disabled but it's not so
8:44
it should be for you disabled I'm not really actually sure why it's not here
8:50
so just disable it and tap it again and you'll see this factory data
8:56
reset so tap on it again and wait for the device to go through another reset
9:02
and this time once it's finished you can actually set up your device
9:07
the way you like it and the process will be finished at that point so we're going to just wait
9:14
some more time until it's finished and and go to the deep process once it's actually visible
9:37
okay and as you can see now we're again on the setup screen and from here you can go
9:53
through the normal setup process as you would normally so i can select a network and continue
10:17
Now once this is actually, once you're on this step that we're right now
10:22
everything that you actually download it, can remove it, it's not going to be needed anymore, so
10:26
yeah from here we can put in the email so I'm gonna put mine and I'm gonna top on
10:41
next here and then put in the password so let me do that okay and once I press
10:54
next I have this screen so just agree to the terms of service of Google I'm not
11:08
going to restore from any things just set it out as a new device you can set up some
11:14
pattern and password some kind of protection way I'm gonna choose pattern for
11:22
example so continue draw the pattern then draw once more to confirm it
11:35
can continue more Google terms of service backup okay continue more Google
11:44
terms of service backup okay From here, I can check it on or off. If you keep it checked on as it is, it's going to actually be finishing a little bit longer. So for the sake, I'm going to actually disable it. So we can get to the main screen a little bit quicker
12:22
Okay. And as you can see, all done. And now the device is fully unlocked, ready to use without any problem
12:34
And you can go, actually we're already added a Google account so it will be the new one visible here. So..
12:52
you can see it's the one that I added previously and the setup screen and everything is working fine
12:59
If you have any questions, leave them down in the comments. And if everything went well
13:06
yes, thank you for watching and I hope you enjoyed it. Don't forget to subscribe and like the video
