0:00
Here I have MantaMID1010 and let me show you how to insert microSD and microSIM card on
0:09
the following device. At the very beginning hold down power key for a few seconds
0:18
When the following options appears on the screen choose power off and tap ok to confirm it
0:24
Wait until your device is completely switched off and afterwards you have to remove debug cover
0:30
Let's do it by using the cavity at the upper edge of your device and simply use your nail
0:35
finger to open the whole item. Here you can insert two SIM card and one microSD card
0:45
So let's start with microSD card. Here I have one of the following cards and you should input this card in that slot in
0:54
that position. Let me show you. Let's push it to the end
0:59
Let me show you one more time. So you have to push the following card in that direction. Excellent
1:08
Let me also show you how to insert microSIM card. Of course here in that slot we can insert microSIM card
1:16
Here I have one of the following cards and let's input this card in that position
1:23
Have a look. And let's push it to the end. Excellent. Now we can close debug cover
1:32
Let me do it. Make sure it's properly closed
1:43
Excellent and now let me switch on my device by holding the power key
1:49
Manta logo is turning on so it means that our tablet is switching on. Excellent
2:02
Let's see if our cards are working. As you can see at the top of the screen right here the device is connected to one of the
2:10
mobile network so it means that our SIM card is working properly
2:14
Now let's unlock the screen. Tap settings. Here you should choose my device right here or more
2:25
Let's tap more. And under this table you've got storage. Let's choose it
2:32
And as you can see right here the device is reading our SD card so everything went well
2:39
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
