0:00
Here I have LG Key4 2017 and let me show you how to insert here SIM and SD card on the
0:10
following device. So at the very beginning let's start by switching on, switching off the device
0:17
Let's hold down the power key, keep holding power button, let's choose power off and tap
0:23
power off again, wait until your device will be completely switched off and afterwards
0:28
let's remove the back cover, so let's use the cavity at the right edge of the device
0:33
right here. So let me remove the back cover, let's do it step by step, as simple as that and here
0:41
you should remove the battery by using the cavity right here and as you can see now you
0:46
can insert in that slot nano SIM and SD card, micro SD card of course
0:53
Let's start by inserting the nano SIM, this is the nano SIM with the characteristic edge
0:58
right here, let's just simply put this card in that position right here, let me just do
1:09
it again, as simple as that, let's push it to the end, let's insert the micro SD with
1:21
the characteristic edge right here, let's press it right here, also to the end
1:29
You may also insert the second nano SIM in that slot right here
1:33
So now let me close the back cover protection and let me put back the battery, let's press
1:43
power key to switch on the device, the LG Q4 is turning on, let's wait a couple of seconds
1:51
if you have N-pin you can enter a pin, let me do it, so let me do it, tab OK, let's check
2:15
if both cards are working properly, so let's choose settings, select general, scroll down
2:27
and here you should choose storage and USB, as you can see the SD card is right here
2:34
you may also check that the device is connected to a Virgin Mobile, so to a mobile network
2:40
so it simply means that the SIM card is also working properly, but you may also choose
2:47
the dual SIM card under the networks and check that everything went well
2:52
So that's it, thank you for watching, please subscribe our channel and leave thumbs up under the video
