0:00
Here I have Maxcom MS456 and let me show you how to enter the recovery mode on the following device
0:12
So at the very beginning let's start by pressing the power key right here
0:17
Let's choose power off and wait until your device will be completely switched off
0:23
Afterwards you need to use the following combination of keys, power key and volume up
0:28
Hold down together these two keys for a couple of seconds, keep holding both keys, release
0:34
them as soon as boot mode pops up. Here you can navigate by using volume up and confirm options by pressing volume down
0:42
So let's choose the recovery and press volume down to confirm it
0:48
Now the device is booting into recovery mode and the Android no command logo pops up, so
0:57
now you have to start holding volume down and while holding volume down press volume
1:01
up once. That's it, this is the Android system recovery, here you can read the information about your software
1:09
You can navigate here by using both volume keys and confirm options by pressing power key
1:15
So as you can see here you can apply update from the ADB, you can update your device by
1:20
using the SD card, you can try to update your phone by using a cache, you can accomplish
1:24
a hard reset operation by choosing wipe data factory reset, you can wipe cache partition
1:30
backup user data, restore user data, check root integrity, reboot to bootloader, you
1:37
can power down your device or view recovery logs. If you would like to quit this mode let's choose either power down or reboot system
1:45
now, in my case let me select reboot system now, so the first option and press power key
1:52
to confirm it. Ok now your device is restarting and booting into a normal mode, let's wait a couple of seconds
1:58
Excellent, the home screen just pops up, now you can unlock your device and start using
2:12
your device in a normal way. Thank you for watching, please subscribe our channel and leave thumbs up under the video
