0:00
Here I have a GoClever Quantum 2400S and let me show you how to insert microSD and microSIM
0:11
card on this device. First of all hold down the power key for a few seconds, then tap power off and wait until
0:18
the device will be completely shut down. Afterwards you have to find the cavity at the right down corner of your phone and simply
0:27
use your nail finger to open the whole item. Now you should remove the battery by using the cavity at the down edge of your battery
0:39
and simply remove it from the phone. Now you have access to three slots, the two of them are for SIM cards and one of them
0:48
are for microSD card. At first let's input our memory card, the characteristic is just right here and simply
0:56
put this card simply like that. Make sure it's pushed to the end
1:02
Now let's insert microSIM card with the characteristic edge right here. Simply put your card in that position and let's push it to the end of the slot
1:16
Now we can insert battery, make sure that everything suits to your device
1:34
And let's switch on your device by holding the power key. The GoClever smartphone is turning on
1:45
Excellent, let's make sure that everything works properly. Let's unlock the screen
1:57
As you can see the phone detects our SIM card, so our SIM card was installed properly
2:06
Now let's go to settings, scroll down and choose storage. And as you may observe our device is reading our SD card, so everything went well
2:19
Thank you for watching, please subscribe our channel and leave thumbs up under the video
