0:00
Here I have Catlet Pillar S50 and let me show you how to insert here the micro SIM and micro
0:10
SD card. So at the very beginning let's start by using your home screen of course and let me press
0:14
power key to switch off my device. Keep holding power key and choose power off
0:19
In order to confirm the powering off your phone let's tap OK
0:24
So now let's wait a couple of seconds until your phone will be completely switched off
0:29
and afterwards let's open the slot for your cards at the right edge of the device right here
0:36
Let's open this slot by using your nail finger and here you can insert two cards
0:43
Of course the micro SD. Here I have my micro SD card with the characteristic edge right here
0:50
Let's enter this card right here and press it to the end
1:01
Now let's insert the micro SIM with the characteristic edge right here
1:08
Let me put this card in that position right here and let's press it to the end
1:17
You should hear the characteristic click. Let's close the back cover protection and let's press power key just to switch on the
1:25
cathode purer and let me make sure that both cards are working properly
1:29
The smartphone is turning on, let's wait a couple of seconds. Excellent the home screen just pops up so let's unlock the screen, tap apps icon, then
1:43
you have to find and select the settings, so let me do it
1:48
Scroll down again and here let me select the storage, it's located right here under
1:53
device tab and as you can see the device is reading our SD card so it's a good sign
1:59
You may also see that the phone is connected to one of the mobile network right here so
2:04
it means also that your micro SIM card is working properly, so basically everything
2:08
went well. Thank you for watching, please subscribe our channel, leave thumbs up under the video
