0:00
Hi, in front of me I have QBOT X-19 and I'm going to show you how to enable the
0:11
Do Not Distair mode on this device. First let's open the quick panel
0:16
To do it, swipe down from the top of the screen twice. Like this
0:21
And here we have Do not Distair mode icon to enable it, tap on the icon
0:27
And to disable the mode, simply tap on the icon. Again, you can also press and hold on this icon to go to the do not-dister mode settings
0:36
and here we can adjust few options for our do-not-dister mode. First we have sound and vibration, we can tap on it right here
0:44
And here we can turn off or on some of the features like alarms, media and touch sounds
0:51
by tapping the sliders next to them. Like that. Okay, let's go back and tap on notification
0:58
tap on notifications. Here we can select one of the profiles. The first one is no sound
1:04
from notifications, second one is no visuals or sound from notifications and the last one is
1:09
custom and if you select it you can adjust your options by checking or unchecking them like
1:17
that and then you can go back. Okay. Here we have calls let's tap on it and
1:28
In here we have a few more options First one is allow calls And here you can select from whom you going to get the sound notification when the DunaDistermode is enabled
1:38
And you can select from anyone, from contacts only, from start contacts only
1:42
and from none. If you select from contacts only, you will get the sound notifications only if somebody from your contacts is calling you
1:55
If you select from start contact, only, for example, you will get this option right here, start contacts, you can tap on it
2:03
it will open the contacts list, and here you can a favorite one of the contacts or more
2:08
and you will get the sound notifications only when these contacts are calling
2:14
And at the bottom right here we have allow repeat callers, and what this option does is basically
2:19
if somebody calls you more than once, within 15 minute period, the sound notification will go through
2:25
And you can enable or disable this option right here. Below calls we have messages, events and reminders
2:34
And here we have allow messages. This is the same options as for calls, but it works for messages
2:39
So basically you can select from anyone, from contacts only, from start contacts only or from none
2:45
And you can also enable or disable the allow reminders or allow events
2:52
Below we have schedule. and here we have duration option, you can tap on it
2:58
and here we can select for how long the Dunad Distermode is going to be enabled And you have options like until you turn it off for one hour and ask every time If you select until you turn it off it going to be turned on turn on rather until you turn it off of course
3:13
Next option is one hour. And if you select it, you can add and subtract the time by tapping on plus and minus buttons
3:21
And the DunaDistermode would be enabled for this period of time. You select it
3:27
And at the bottom we have Ask Every Time. And this option, basically how it works
3:31
is if you want to enable do not-dister mode, by tapping on this icon, it's going to ask you for how long you want it to be turned on
3:39
And you can select until you turn it off or for a certain period of time. And below duration we have turned on automatically
3:47
And here basically we can set up a schedule for our do-not-distar mode. We have two pre-existing ones
3:53
We can tap on them to edit the or enter the editing mode
3:57
And here we can tap on this pencil icon to edit. the name and tap okay right here we can enable or disable the schedule like that below we have
4:14
days we can tap on it and select the days on which the schedule is going to be active and you can
4:18
check them or uncheck them by tapping on these boxes like that then tap done below days we
4:25
have start time this is the hour on which the schedule is going to be turning on
4:31
And you can change it by pressing and holding on this green circle and dragging it around the clock phase like this to set the hour then release it and do the same for minutes Like that And below start time we have end time basically the hour on which the schedule is turning off
4:48
And you can again adjust the time by dragging it around the plug phase
4:55
Like that. Then type OK. And at the bottom we have option alarm can override the end time
5:00
And you can enable it or disable it. like that by tapping the slider
5:06
And once you're done, simply go back. You can also add your own rule by tapping add rule, select the type, for example, time
5:14
enter the name, and tap add. And here we can edit the settings we did before
5:24
And once you're done, simply go back. You can also remove the schedules by tapping the bin icon right here and tapping delete
5:32
like that. And at the bottom right here in this menu, in Dunadister menu, we have Turn On Now button
5:38
We can tap it to turn on the Lunadister mode. And we can then tap turn off to disable it
5:46
Like that. And that's how you enable the Luna Distair mode on this device
5:53
Thank you for watching. If you found this video helpful, please consider subscribing to our channel and leaving the like
