0:00
In this tutorial let me show you how to insert microSD and microSIM card in Lenovo Q3 Note
0:10
First of all hold down the power key for a few seconds
0:15
When the following menu appears on the screen choose power off and confirm the whole operation
0:19
by tapping OK. Wait until your device is completely switched off. And afterwards you have to use your middle finger to open the back cover
0:29
You have to do it step by step. Now you have access to your battery
0:34
You should remove your battery to have access to your slots. So use the cavity at the down edge of your battery and simply remove it from the phone
0:46
Now you can insert here microSD card. Here I have one of the following card with the characteristic edge right here
0:53
And you have to put it in that way to the first slot
0:57
Make sure it's pushed to the end. And now let's install microSD card, microSIM card sorry, with the characteristic edge right there
1:06
And you have to put it in that position into the first slot
1:11
Let me show you. Make sure it's pushed to the end. And now you can insert back the battery
1:23
Put it back in that position. Insert the back cover. And now we can switch on our phone to check that both cards are working properly
1:38
The Lenovo is turning on. Excellent
1:47
As you can see the phone is reading our SD card. And now we can read that the phone reads also our SIM card
1:58
Tap now for a second. And also our SD card. So everything went well
2:04
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
