0:00
Here I have Philips Xenium V526 and let me show you how to insert microSD and microSIM
0:11
card in the following phone. At the very beginning hold down the power key for a few seconds, then tap power off
0:17
and tap ok to confirm the whole operation. Wait until your device is completely switched off and afterwards you have to remove the
0:24
back cover. Let's do it by using right down edge of your phone and simply use your nail finger to open
0:33
the whole item. Let me show you. Let's do it step by step from the bottom of your device to the top
0:46
Excellent. And now you have access to your slots. You've got two slots for SIM card and one from the memory card
0:58
Let's start with the memory card so let me input the microSD card with the characteristic
1:03
stitches right here into the middle slot. Let's push it to the end
1:09
Let me show you one more time. Push the following card to the end of the slot
1:21
Make sure it's properly pushed. And now let's install microSIM card with the characteristic stitches right here
1:29
Here I have one of the following card. And let me input this card in the first slot
1:38
Ok. Let's place this card here and push it to the end of the slot. Excellent
1:47
Make sure that both cards switch to your device. Let's insert key back cover
1:59
And let's use a power key to switch on our phone and make sure that both cards are working properly
2:08
The Philips is switching on. Wait a couple of seconds. Excellent. Let's unlock the screen
2:24
Let me find and select settings. Scroll down, choose storage. And as you may observe the phone is reading our SD card
2:34
And also the phone is connected to one of the mobile networks so it means that both cards are working properly
2:40
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
