0:00
Here I have Manta Carl, let me show you how to input SIM and MicroSD card on the following phone
0:11
First of all let's hold down power key for a few seconds, then from the phone's options
0:15
let's choose power off and wait until your phone is completely switched off
0:30
Afterwards you have to remove the back cover. The best way to do it is by use one of the phone's corner and simply use your nail finger
0:37
to open the whole item. Let's do it step by step from the bottom of your device to the top and now you have access
0:44
to your battery. Let's remove the battery by using the cavity at the down edge of the item and simply remove
0:52
the whole thing from your phone. Now you have access to your slots
0:57
Let's insert SIM card into the first slot right here. Here I have one of the following card with the characteristic edge right here and simply
1:06
put this card in that slot. Make sure it's pushed to the end and now let's insert memory card, of course in that
1:16
case it's MicroSD card, so let's put this card in that way
1:24
Make sure it suits your device. Now you can insert the back cover
1:32
Just close the back cover protection and now you can switch on your phone to check if both
1:41
cards are working properly. The Manta Carl is turning on. Excellent
1:54
Let's unlock the screen. As you can see at the top of the screen the device is connected to one of the mobile networks
2:07
so our SIM card is working properly. Now let's go to apps, find and select settings, scroll down and choose storage and as you
2:18
can see the device is reading our SD card. So everything went well
2:22
Thank you for watching. Please subscribe our channel and leave thumbs up under the video
