0:00
Here I have a Vico Palm Fab and let me show you how to insert micro SD and micro SIM card
0:10
on the following phone. First of all, hold down the power key for a few seconds, then tap power off and choose
0:17
OK to confirm the whole operation. Wait until your phone is completely switched off and afterwards you have to find the cavity
0:24
at the right edge of your phone and simply use your nail finger to open the whole item
0:30
Let's do it step by step, from the bottom of your device to the top
0:38
And now you have access to your slots. At first let's remove the battery
0:50
Now let's install memory card, in that case it's of course micro SD card with the characteristic
0:55
edge right here and simply put this card in the first slot
1:00
Let's do it that way. Make sure it's pushed to the end
1:06
And now let's insert micro SIM card. Here I have one of the following card with the characteristic edge right here and simply
1:13
put this card in the middle slot. Well done. Now you can put back the battery
1:23
Let's do it properly. Let's insert the back cover
1:42
And let me switch on my device to check if both cards are working properly
1:48
The Vico smartphone is switching on. Wait a few seconds
1:59
Excellent let's unlock the screen. Find and select settings
2:12
Scroll down and choose SIM cards. As you can see the device is reading our SIM card so it's a good sign
2:21
Let's scroll down again and choose storage. And you may observe from the following information that the device is reading our SD card
2:30
So everything went well. Thank you for watching. Please subscribe our channel and leave thumbs up under the video
