0:00
Here I have Blackberry Classic and let me show you how to insert here SIM and microSD card
0:11
So at the very beginning let's hold down power key for a few seconds, keep holding power
0:14
button, wait a couple of seconds until your phone will be completely switched off
0:20
Now the device is turning off, let's wait a couple of seconds
0:44
Afterwards you have to prepare some thumber tack or special eject tool just to open your
0:50
tray to your slots. So let me do it. Let's find the tray at the left edge of the device, right here
0:58
So here you have two trays. Let's start with the SD tray, the bottom one, let me do it
1:04
Let's press it into this hole, now you can remove the whole thing from your device
1:08
So let's do it. And as you can see here you can insert microSD card
1:12
So here I have my memory card with the characteristic edge right here and simply put this card in
1:17
that position. Let me show you one more time, let's put it that way
1:23
And let's insert the whole tray into your device. So let's place your card and let's put your tray to your phone
1:32
Let's press it to the end. Now let's open a tray for nanoSIM card
1:41
So as I said, this is a tray when you have to input a nanoSIM card
1:45
So let's input your nanoSIM card with the characteristic edge right here and let's put
1:50
this card in that position. Make sure it suits, let me show you one more time
1:55
Let's put this card in that position. Now let's put the whole tray into your device
2:11
Excellent, let's push it to the end. Make sure it's closed properly
2:17
And now all you have to do is switch on your BlackBerry and check if both cards are working properly
2:22
So hold down power key for a couple of seconds. Now you can release power key, the BlackBerry is turning on
2:35
As you can see the BlackBerry is starting. Excellent, now let's find and select settings
2:56
This is that icon right here. Let's wait a few seconds until the phone loads the data
3:26
Excellent, so now you can use the system settings. Let's choose networks and connections, the second option right here
3:37
And let's tap mobile network. And as you can see the device is connected to one of the networks, so it means that our
3:44
SIM card is working properly. Let's go back. Let's scroll down and find
3:54
storage and access right here. Let's tap it. And as you may notice the device is reading our media storage details, so it means that
4:02
our microSD card was installed properly, so everything went well. Thank you for watching, please subscribe our channel and leave thumbs up under the video
