0:00
Here I have Catalpillar S30 and I would like to show you how to insert microSD card and
0:10
SIM card in the following device. First of all hold down the power key for a few seconds and when the following menu appears
0:17
on the screen choose power off and wait until your device is completely switched off
0:23
Afterwards open the covers from the right edge of the screen and here you have access
0:31
to both slots to microSD and nanoSIM card. First of all I'm going to show you how to enter microSD
0:43
You should put your card in that way and insert to the end of the slot
0:50
Use your nail finger, just push it, excellent. And in order to install nanoSIM card you have to open by using your nail finger the following slot
1:08
And here you have to locate your nanoSIM card
1:18
You should do it in that way. Make sure that the card suits to the slot and put it back in the same way. Excellent
1:37
Now you can close both slots, press and hold power key and let's see if both cards work
1:48
properly. The phone is turning on
2:02
Excellent as you can see at the top of the screen the phone is connected to one of the
2:06
mobile network. So it means that the SIM card was installed properly and let's see how the microSD card works
2:17
Go to settings, scroll down and find storage
2:28
And as you can see the phone is reading our SD card so everything goes well
2:34
Thank you for watching, please subscribe our channel and leave a thumb up under the video
